Zanussi EVO900 Pasta Maker User Manual


 
ZANUSSI
P R O F E S S I O N A L
4/6 BURNER GAS BOIL. TOPS - cast iron grids
EVO900
392027
Net weight - kg. 79 79 110 110
Total Power - kW 28 40 44 60
Front burners power - kW 6, 6 10, 10 6, 6, 6 10, 10, 10
Front burners dimension - mm Ø 60, Ø 60 Ø 100, Ø 100 Ø 60, Ø 60, Ø
60
Ø 100, Ø 100,
Ø 100
Back burners power - kW 10, 6 10, 10 10, 6, 10 10, 10, 10
Back burner dimensions - mm Ø 100, Ø 60 Ø 100, Ø 100 Ø 100, Ø 60,
Ø 100
Ø 100, Ø 100,
Ø 100
height 250 250 250 250
depth 900 900 900 900
width 800 800 1200 1200
External dimensions - mm
Power supply Gas Gas Gas Gas
Z9GCGH4C00
392027
Z9GCGH4C0M
392028
Z9GCGL6C00
392033
Z9GCGL6C0M
392034
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
EVO900: a range designed to
guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected throughout
the line in its modularity, construction
and numerous configurations:
countertop (on base or table),
free-standing, on concrete or
stainless steel plinth, bridged or
cantilever. Thanks to its advanced
technology and premium
performance, EVO900 is a perfect
solution for restaurants as well as
large institutions needing high power
and high productivity. The models
detailed in this sheet are 4/6 burner
gas boiling tops with cast iron grids.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
The gas burner top is ideal for
kitchens needing a flexible, powerful
and efficient cooking top.
The high efficiency burners allow
the flame to be precisely regulated
and provide the proper amount of
heat to pots and pans of different
sizes (from a minimum of 10cm
diameter to a maximum of 40 cm
diameter).
Burners with optimized
combustion interchangeable on site,
flame failure device and protected
pilot light:
- 60 mm burners with continuous
power regulation from 1,5 to 6 kW
- 100 mm burners with continuous
power regulation from 2,2 to 10 k.
Manual ignition of the top burners.
Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
Cast iron grids.
All gas appliances are supplied for
use with natural gas, with LPG
conversion jets supplied as
standard.
The special design of the control
knob system guarantees against
water infiltration.
All models can be easily mounted
on open base cupboards,bridging
supports or cantilever system.
IPX5 water protection.
Main connections can be via the
rear of the unit.
Access to all components from
the front.
Provided with a service duct to
facilitate installation and can be
mounted on table tops, open base
cupboards bridging or cantilever
supports.