Filter
Top Products
ZANUSSI
P R O F E S S I O N A L
GAS FRYERS - 15 LT
N 900
Model 200336
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
BASKET FOR 14/15 LT FRYERS 1 2
INCLUDED ACCESSORIES
Net weight - kg. 50 86
gas 14 28
Power - kW
Maximum Well Capacity -lt 13, 15 13, 15
Temperature limiter l l
Thermostatic l l
height 505 505
depth 380 380
width 240 240
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 900 900
width 400 800
External dimensions - mm
Power supply Gas Gas
NFRG400
200336
NFRG800
200337
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 15 litres fryers in gas version.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Stainless steel burners with
optimized combustion, flame failure
device and protected pilot light.
� The "V" shaped wells have the
heating elements attached to the
outside allowing an increased life of
the oil, greater productivity and an
easier cleaning.
� Working temperature from 120ºC
to 190ºC.
� Appliances are supplied for use
with natural gas, with LPG
conversion jets supplied as standard.
� All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
� Additonal overheat safety
thermostat.
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
� Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
� Feet in stainless steel 50 mm
adjustables in height.
� The special design of the control
knob system guarantees against
water infiltration
� Door with handles in stainless
steel.
� All models can be installed on
cantilever system.
� Main connections can be via the
base of the unit. All models provided
with service duct to facilitate
installation.