Zanussi RTCS140ELB Dishwasher User Manual


 
ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
COMPACT RTCS 140
Supply voltage 400 V, 3N, 50 400 V, 3N, 50 400 V, 3N, 50 400 V, 3N, 50
Net weight - kg. 550 550 508 508
Total installed power - kW 26 26 25.9 25.9
water flow - liters/hr 240 240 240 240
boiler power - kW 12 12 12 12
boiler capacity - lt. 12 12 12 12
temperature - °C 80-90 80-90 80-90 80-90
Rinsing
pump power - kW 1.5 1.5 1.5 1.5
tank capacity - lt. 100 100 100 100
temperature - °C 55-65 55-65 55-65 55-65
1st wash
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119
depth 884 884 884 884
width 1125 1125 1125 1125
External dimensions - mm
Insulation l l l l
Air emission - m³/h 180 180
Capacity baskets/h 1st/2nd speed 140, 90 140, 90 140, 90 140, 90
Capacity dishes/h 1st/2nd speed 2520, 1620 2520, 1620 2520, 1620 2520, 1620
N° of speeds 2 2 2 2
cold water inlet °C 15 15
hot water inlet °C 50 50 50 50
pressure min. , max. - bar 3, 7 3, 7 3, 7 3, 7
Water supply
Energy Saving Device incl. cond. unit l l
Feeding direction from RH to LH from LH to RH from RH to LH from LH to RH
Power supply Electric Electric Electric Electric
Model Electronic - A Electronic - A Electronic - B Electronic - B
RTCS140ERA
534316
RTCS140ELA
534317
RTCS140ERB
534318
RTCS140ELB
534319
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The Zanussi Dishwashing range is produced
for customers with the highest conceivable
demands for good efficiency, economy and
ergonomics for dishwashing operation. The
product range comprises glasswashers,
undercounter dishwashers, hood type
dishwashers, rack type dishwashers and pot
and pan washers. The rack type dishwasher
range is designed to be easily connected
with the equipment included in the Zanussi
Handling System range, to create a
functional and ergonomic dishwashing area.
The rack type dishwasher RTCS140 has a
capacity up to 140 racks per hour with 2
speeds, variable on installation. The range
consists of 4 electrically heated models
(steam on request), available with or without
Energy Saving Device (ESD).
FUNCITONAL AND
CONSTRUCTION
FEATURES
Solid 3mm square stainless steel
sub-frame.
All rear positioned water tubes in stainless
steel.
Only one cable for electrical connection.
Service from the front and from the side.
Pre-arrangements for automatic detergent
dispenser, energy management device and
HACCP implementation (both basic as well
as integrated system).