ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
COMPACT RTCS 180
534322
Net weight - kg. 575 575 533 533
Total installed power - kW 25.7 25.7 25.6 25.6
water flow - liters/hr 240 240 240 240
boiler power - kW 12 12 12 12
boiler capacity - lt. 12 12 12 12
temperature - °C 80-90 80-90 80-90 80-90
Rinsing
pump power - kW 1.0 1.0 1.0 1.0
tank capacity - lt. 100 100 100 100
temperature - °C 55-65 55-65 55-65 55-65
1st wash
pump power - kW 0.20 0.20 0.20 0.20
tank capacity - lt. 45 45 45 45
temperature - °C <35 <35 <35 <35
Pre-wash
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119
depth 884 884 884 884
width 1837 1837 1837 1837
External dimensions - mm
Insulation l l l l
Air emission - m³/h 180 180
Capacity baskets/h 1st/2nd speed 180, 120 180, 120 180, 120 180, 120
Capacity dishes/h 1st/2nd speed 3240, 2160 3240, 2160 3240, 2160 3240, 2160
N° of speeds 2 2 2 2
cold water inlet °C 15 15 15 15
hot water inlet °C 50 50 50 50
pressure min. , max. - bar 3, 7 3, 7 3, 7 3, 7
Water supply
Energy Saving Device incl. cond. unit l l
Feeding direction from RH to LH from LH to RH from RH to LH from RH to LH
Power supply Electric Electric Electric Electric
Model Electronic - A Electronic - A Electronic - B Electronic - B
RTCS180ERA
534320
RTCS180ELA
534321
RTCS180ERB
534322
RTCS180ELB
534323
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The Zanussi Dishwashing range is produced
for customers with the highest conceivable
demands for good efficiency, economy and
ergonomics for dishwashing operation. The
product range comprises glasswashers,
undercounter dishwashers, hood type
dishwashers, rack type dishwashers and pot
and pan washers. The rack type dishwasher
range is designed to be easily connected
with the equipment included in the Zanussi
Handling System range, to create a
functional and ergonomic dishwashing area.
The rack type dishwasher RTCS180 has a
capacity up to 180 racks per hour with 2
speeds, variable on installation. The range
consists of 4 electrically heated models
(steam on request), available with or without
Energy Saving Device (ESD).
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Solid 3mm square stainless steel
sub-frame with bolt-together construction that
can be delivered assembled or in modules to
be connected on site.
� All rear positioned water tubes in stainless
steel.
� Only one cable for electrical connection.
� Service from the front and from the side.
� Pre-arrangements for automatic detergent
dispenser, energy management device and
HACCP implementation (both basic as well
as integrated system).