Zanussi ZDT 420 Dishwasher User Manual


 
Programme Half load Degree of soil Type of load Programme de-
scription
5
Bio 50°
3)
Yes
4)
Normal soil Crockery and cut-
lery
Prewash
Main wash
1 intermediate rinse
Final rinse
Drying
6
Glass 45°
No Normal soil Delicate crockery
and glassware
Main wash
1 intermediate rinse
Final rinse
Drying
7
Plate warmer
No This is a programme both designed to heat
plates before serving or remove dust from
dishes which have not been used for a long
time.
1 hot rinse
This programme
does not require the
use of detergent.
1) When the Half load button is pressed, the prewash phase will be automatically excluded. In this case the detergent dose for
the prewash phase is no longer necessary.
2) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4
persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.
4) When the Half load button is pressed, the duration of the washing phase is reduced.
"Auto" washing programme
During the "Auto" washing programme the
amount of soil on the dishes is determined by
how cloudy the water is.
If the appliance is partially loaded and the
dishes lightly soiled, the "prewash", "main
wash", and "rinse" phases of the programme
are shorter and the water consumption level is
lower.
If the appliance is fully loaded and the dishes
heavily soiled, the "prewash", "main wash", and
"rinse" phases of the programme are longer
and the water consumption level is higher.
For this reason the programme duration, water
and energy consumption levels can vary within
the stated range for "Auto" programme (see
"Washing programmes chart").
During the "Auto" programme the temperature
of the main wash water is also automatically
adjusted between 45°C and 70°C depending
on the amount of soil on the dishes.
First use
Before using your dishwasher for the first time:
Ensure that the electrical and water connec-
tions comply with the installation instructions
9