Filter
Top Products
20
Error message
The electronics of the dishwasher can independently
recognise and display faults. If a fault occurs, an error
code in the display will blink.
Please note down this error code before contacting
your local Service Force Centre.
The error message is deleted by switching off the main
switch.
Error codes and possible
causes
A = Water tap closed, or feed filter blocked.
C = Drain hose, coarse or fine filter or sink trap
blocked
E = Water pressure too low, water tap not comple–
tely opened, feed line or feed filter blocked,
machine losing water.
H = Call Service Force
L = Call Service Force
P = Call Service Force
U = Call Service Force
Unloading the crockery basket
After the washing programme is complete:
1. First unload the lower basket.
2. Then unload the upper basket, so that no drops of
water fall onto the dry crockery in the lower basket.
Inspect the coarse filter after every washing
sequence. Clean as necessary.
Main switch
ON/OFF
Control panel