Zanussi ZT 6910 Dishwasher User Manual


 
DIMENSIONS Width 59.6 cm
Height with worktop 81.8 - 87.8 cm
Max depth 55.5 cm
Max depth with open door 111.4 cm
ELECTRICAL CONNECTION Voltage 220/240 V - 50 Hz
MOTOR RATING DURING WASH 200 W
POWER OF HEATING ELEMENT 2100 W
OVERALL POWER 2300 W
WATER SUPPLY PRESSURE Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
CAPACITY 12 place settings
Technical specifications
20
If after all these checks, the problem persists,
contact your local Service Force Centre, quoting the
model and serial number.
This information can be found on the rating plate
located on the right hand side of the dishwasher
door (see picture).
Protection against flooding
The machine is fitted with a device in the bottom of
the machine to protect against flooding.
The device will operate if there are any water leaks
in the machine, however it will only operate if the
machine is on.
In case of malfunction, a fault code will appear in the
digital display will show "AL4".
To repair the dishwasher, turn off the water tap and
call the Service Force Centre.
Prod.No.
........
Ser. No.
.........
Mod.
........
RA01