Zooper HC900C Stroller User Manual


 
GENERAL CARE AND SAFETY TIPS:
BB
CC
DD
WARNINGS
!
INTERNATIONAL MODEL NUMBER: HC900C
1 32 4
INTERNATIONAL MODEL NUMBER: HC900C INTERNATIONAL MODEL NUMBER: HC900C
5
INTERNATIONAL MODEL NUMBER: HC900CINTERNATIONAL MODEL NUMBER: HC900C
6
PEAS & CARROTS
PRESS
Fig.1
Seat fabric may be removed and hand washed using cold water and mild soap.
Do not machine dry fabric.
Do not use bleach when washing the seat fabric.
Tubes and plastic parts may be wiped clean with wet cloth.
The removable stack tray can be washed in the dishwasher. It is recommended
that you use the top rack.
MAINTENANCE
In order to maintain the highest quality standards, the distributor reserves the
right to improve or alter any Zooper design without notice or obligation to any
previous purchaser. For questions or service needs, please contact the service
center located in your country of residence. Sending in your warrantee card will
help expedite any service needs.
TO OPEN THE HIGH CHAIR:
Press on the plastic buttons located on the inside of the top
plastic moldings of the frame. While pressing on both
buttons push the front legs of the high chair out to open
completely. (Fig1). High chair should be unlocked and in a
steady and stable position while opened.
WARNINGS
Prevent serious injury or death from falls or sliding out.
Always secure child in the 5-point safety harness restraint system.
Always keep child in view when in high chair.
Never leave your child unattended.
Never use the high chair near an open fire or exposed flame.
It is recommended the high chair be used only by children capable of
sitting upright unassisted.
This product is not recommended for use with a child over 45 lbs.
Do not overload the basket: Maximum load is 7 lbs.
Never hang bags or other items from the high chair.
The tray should always be attached to the seat when your child is seated in
the high chair. Never use the high chair without the tray attached.
It may be unsafe to use accessories other than those approved by the
manufacturer or distributor.
!
Fig.2
Fig.3
Fig.4
Hand clutch
PULL
Fig.5
Fig.6Fig.6
Fig.7
BB
CC
DD
AA
Shoulder4Shoulder4
StrapsStraps
HC900C
Fig.8
Fig.9
Fig.10
Fig.11
FOOTREST
To lower the footrest, bring the plastic oval shaped cover
down. When not using the footrest, push it back up in place
under the footrest fabric covering.(Fig 10)
CLOSING THE HIGH CHAIR:
With one foot anchoring the rear base tube,simultaneously
push in on the two plastic buttons located on the plastic
moldings on top of the frame, and bring in the front legs of
the chair towards you to close. The front and rear legs
remain partially separated so that the chair will stand on its
own. (Fig 11).
WARNING: Do not force the front and rear legs
completely together as this may damage your high chair.
Be sure children are at a safe distance and cannot reach
moving parts whenever opening or closing the high chair.
!
WHEELS:
The wheels lock into position by pressing on the small levers
located on top of each wheel
.
WARNING: Always make sure the wheels are in the
!
SAFETY HARNESS
Zooper provides a special 5-point harness system for the
ultimate in safety. Used properly, this harness system will
keep your child seated and safe. To secure your child in the
harness, push buckles (A) and (B) into the buckle housing (C)
until the buckle prongs snap into position. Carefully adjust
slider (D) to fit snugly and comfortably around your child.
(Fig 8). Follow the same procedure to adjust the should
straps. Always retighten the harness when the child is in a sit
up or layback position.
WARNING: The child should be secured in the
high chair at all times by the 5-point harness restraining
system, either in the reclining or upright position. The
tray is not designed to hold the child in the chair. It is
recommended that the high chair be used only by
!
HEIGHT ADJUSTABILITY
The seat adjusts to 4 positions. To move the down press in on
both buttons on the levers located on the inside of the high
chair legs. While pressing on these buttons, move the seat
down into desired position.(Fig 9). To raise the chair, put one
foot on the rear base bar, one hand on either top plastic
molding, and with you other hand, pull the seat up into
desired position. There is no need to press the release
buttons when raising the chair.
!
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR
HIGH CHAIR AND KEEP THEM FOR FUTURE REFERENCE. THE SAFETY OF YOUR
CHILD DEPENDS ON IT.
Thank you for choosing Zooper.
WARNING: Always make sure that your child is not
seated in the high chair while making these adjustments.
Be sure children are at a safe distance and cannot reach
moving parts whenever opening or closing the high chair.
!
ATTACHING THE BACKREST:
The backrest is packed separately from the seat base. To
attach the backrest, locate the spring lock buttons on the
outside of the tubes of the backrest bar. (Fig2). Make sure
the buttons are coming out of the holes correctly and
have not slipped inside the tube during shipping. If you
are missing a spring lock, please contact the appropriate
service center, listed after maintenance instructions,
for a replacement part.Push the backrest bar completely
into the two entry holes located on the back of the seat
base. Visually check to see that the silver spring heads
pop into the small holes located on either side of the
bottom of the seat, (Fig3 ). Also, pull out on the backrest
bar to make sure that it has locked into place.
ATTACHING THE CROTCH STRAP
Next located the crotch strap. It is fixed to the lower part of
the seat belt and goes through the fabric opening in the
middle of the seat near the footrest. Make sure the
rectangular plastic anchor is inserted into the
corresponding slot on the base of the seat itself. (Fig 4)
Check that it is properly inserted by pulling out on the
strap. It should not pull through the opening slot of the
seat.
!
ATTACHING THE SEAT FABRIC
Once the backrest and crotch strap have been properly
installed as detailed above, complete the fabric
attachment by snapping the armrest padding to the
outside of the plastic armrest molding.
ATTACHING THE TRAY:
The tray attaches to the high chair by inserting the tubes of
the tray into the openings
at the ends of the armrests. Locate the hand clutch on the
underside of the tray.(Fig 5). Pull the lever toward you with
one hand while pushing in the tray with the other hand until
you hear the click. Pull on the tray to make sure that it has
locked into place.(Fig 6).
To remove the tray, pull the level as above while pulling out
on the tray with the other hand.
TRAY STORAGE:
For storage, the tray can be attached to the back of the
high chair. Just above the rear base plastic moldings there
are two plastic holders. On the underside of the tray there
are two inert moldings located on the outside of the main
tray tubes. These are inserted into the holders for tray
storage. (Fig 7).
WARNING: Never make any adjustments to the
seat with your child seated in the high chair.
Be sure children are at a safe distance and cannot reach
moving parts whenever adjusting the high chair.
ATTACHING THE BASKET
Attach the basket by snapping around the tubes of the
backrest bar.
WARNING: The tray should always be attached to
the seat when your child is seated in the high chair.
Never use the high chair without the tray attached.
!
WARNING: Failure to use the crotch strap correctly
could result in injury to your child. Always make sure the
crotch strap is threaded correctly and securely
through the seat and the seat fabric before placing your
child in the chair.