Can someone advise how I can adjust the front door of the LSI 61UK dishwasher. Currently the door does not stay open, I have noticed that below the front door their is two red adjusting screws on either side. They don't seem to of had little effect when I adjust them? I wondered if their was a installation manual that would show how to this, especially as its a fitted unit and has a cabinet fitted to the fron door. Can anyone advise?

Asked by Steve on 04/25/2008 4  Answers

ManualsOnline posted an answer 16 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
4 Unfortunately, if the unit has been opened. the springs may have been installed but the leavers which attatch to the springs to re close the door may have not been seated correctly, resulting in the dorr being pushed open rather that pulled closed. The only solution is to remove the metal / plastic cosmetic fascia and locate the springs. Reseat the spring leavers ( you'll know they're correct because the tension on the sping when myou try to attatch it to the body of the unit will be high) so the door tries to clos and using pliers and screw driver, attatch the loop end of the spring onto the hole in the metal strap on the body of the unit. It may seem complicated, but if you or someone else removes the fascia of the washer it will look self explanatory. If the problem began after a service by a technician, I suggest you contact the organisation in question and have them correct the problem under the terms of the labour warranty.
Was this answer helpful?
0 I will take on board your advice and give it a go! Again, many thanks!
Was this answer helpful?
0 You're very welcome.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.