1. Manuals
  2. Kitchen Appliance Support
  3. Asko Support
  4. Dishwasher Support
Support User Manuals
Question About Asko Dishwasher 1605
Cycle stops and water pump keeps going...

We have had a repairer out 4 times and are booked for a fifth. They have replaced the water pump and a valve. The water is collecting underneath (it's clean so not a backflow from drain)and we know that removing this water makes it work again temporarily, but we can't find why it's collecting there in the first place. The repairer has checked the hoses when machine is hot in case this was causing a slow leak. It seems to be around the final rinse that problems start and each time it's been "fixed" it's lasted 3 to 4 washes before doing it again implying maybe a slow biuld up of the water.

Asked by Victoria on 07/21/2008 2  Answers

ManualsOnline posted an answer 15 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

LOU posted an answer 15 years, 7 months ago

0 pin hole water supply solinoid valve.sometimes very hard to spot
Was this answer helpful?

Victoria posted an answer 15 years, 7 months ago

0 We finally had the problem fixed. The repairer discovered that the timer had a fault but only on the final rinse, which he said was very unusual as normally if the timer is the issue it is totally broken not only playing up in one part of the cycle. Once the timer was replaced the machine has worked perfectly although it took 5 visits and over $400 in unecessary repairs first (pumps, valves etc replaced to no avail).
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual