How do I change the bulb in the mricowave please?

Asked by Colleen on 04/13/2014 3  Answers

ManualsOnline posted an answer 10 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 To change the bulb you need to take the casing off by removing the screws at the back. This removes the sides and back in one piece ( this is a good opportunity to get into the gaps you can't normally reach to clean!!!) then looking from the back of the microwave, look to the top left and you will see a black piece of plastic. This is the base of the bulb. This needs wiggling out. It's not a normal bulb!!! Don't try and turn the bulb otherwise you'll break the glass!!!!!! You need to pull the connectors off the two metal pins. Then put the new bulb on and retrace your steps. I will load a picture of the bulb. They are £4.99 on eBay with free delivery. The bulb is T170. Hope this helps.
Was this answer helpful?
0 http://www.ebay.co.uk/itm/like/350110272050?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108&ff19=0
Was this answer helpful?
0 Above is a link for the bulb required! I would advise you order this before you start to take the back off etc. as these are not available in DIY stores.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.