1. Manuals
  2. Kitchen Appliance Support
  3. Black & Decker Support
  4. Refrigerator Support
Support User Manuals
Question About Black & Decker Refrigerator BCD33B
How can I adjust the door on this fridge...

How can I adjust the door on this fridge

Asked by Steve on 05/13/2014 1  Answer

ManualsOnline posted an answer 10 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 4 months ago

5 Well, I have to answer this is two parts. If you are referring to a door alignment problem, then the procedure will be to loosen the brackets and realign the doors and re-tighten the brackets. The top and second brackets will allow a re-alignment. But, if you are referring to a gap, because the doors are too low, then this is the procedure: Remove the top bracket, and lift the freezer door off of the lower door pin. If there is a gap at the top of the refrigerator door, letting warm air inside. This happens often due to weight on the door. Now, remove the bracket just above the refrigerator door, and lift the door off of the bottom door pin bracket. You can sometimes bend the lower bracket upward to reduce the drop. But another successful method is to slip some washers on the lower pin to shim the door back to the height required to comfortably re-install the refrigerator top door pin bracket, and get a good snug fit of the door seal. Then replace the freezer door, and top pin bracket, holding the doors to align, and tighten. Hope this helps, I have had to do this to many refrigerators in my career, and should work for you. If you need any further assistance, feel free to ask.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual