1. Manuals
  2. Kitchen Appliance Support
  3. DCS Support
  4. Range Support
Support User Manuals
Question About DCS Range SC305
DCS SC305 that the right front burner ignitor keep...

DCS SC305 that the right front burner ignitor keeps on clicking even when the burner is on (also when any other burner is on it keeps clicking). The center and left front burners do not ignite and the only igniter clicking is the left front.

Asked by Paul John Densley on 11/26/2013 1  Answer

ManualsOnline posted an answer 10 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

P posted an answer 10 years, 3 months ago

0 We had the same problem with a burner that would ignite incessantly and a boil over on the stove. My fix was to remove the top cover, clean and expose a hole in the middle surrounded by a brass nut. Clean the venturi ( small hole that emit gas to main burner). Remove the brass nut and you will see a second hole with a venturi to control the simmer. This is where my problem was located. I used a wooden shish ka bob skewer to clean the food debris and blew the hole clean with a can of compressed air. The compressed air used to clean a computer keyboard. Reassemble and it works without the incessant click. If you are incline to remove the ignitor, use care as it is 2 inches long and wired. One must pull straight to avoid breaking. I clean the ignitor with a Q tip and rubbing alcohol. Good luck.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual