1. Manuals
  2. Kitchen Appliance Support
  3. Kelvinator Support
  4. Ice Maker Support
Support User Manuals
Question About Kelvinator Ice Maker KICE 150
Manual...

I would like to know how to open the Ice maker Kelvinator KICE 150 to try and do fault finding.

Asked by Andre on 02/02/2009 3  Answers

ManualsOnline posted an answer 15 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Willi posted an answer 15 years, 7 months ago

0 Get Hold of a Ph1 x200 Screwdriver and then remove the Screws from the Bottom: 4 x through the long Holes in the front of Machine 3 x through the long Holes at the back 2 x on the left Side below the Electrical Cover (remove Electrical Cover) 1 x Left side through the long Hole at the Handle on the bottom 1 x Short Screw next to Cube Ice outlet. Now top Cover is loose, but stuck on the top FillPipe. Remove one ScrewCover at the Top of the black Button Panel and remove the Screw below. Lift top Cover slightly and remove from the buttom at the front two Screws holding the Button Panel. Lift and unclip the Button Panel. Now you can see in the middle of the Machine he Silicone Fill Pipe still clipped to the Top Inlet, unclip and lift top Cover. Easy..........
Was this answer helpful?

Nicolas posted an answer 15 years, 1 month ago

0 I would like to find out what the lights and buttons mean?? on our machine the writing has all worn off.. as well our machine does not want to fill up with water unless we turn it off and and on.. It also makes a kluck kluck sound half the time.. some one please help
Was this answer helpful?

miriam posted an answer 13 years, 8 months ago

0 how do u clean dat lil bar the tempretura gauge mine has turned green
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual