The top drawer kept running after the cycle was complete unless I turned it off at the main switch. I moved the bottom drawer controller to the top and then I received a F1 code and it kept running. The controller worked fine in the bottom drawer so what can be the problem

Asked by Marty on 01/25/2011 2  Answers

ManualsOnline posted an answer 13 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Could not reset the F1 Code. Pulled both drawers out, dried everything (wiring, etc). Checked the circuit board. Turned out to be the heating plate in the bottom drawer had been shorted (burnt out). Problem started when detergent was used (accidentally) and forced water and suds through machine to overflow. Normally the flood indicator would be correct because the water would not reach this indicator as it is facing down. Hopefully this will sort the problem. Will keep informed.
Was this answer helpful?
0 Disherwasher keeps beeping on and off. Appears to be a rinse stage. Have tried cancelling program, also have switched machine on and off at the wall. Does anybody have any suggestions please.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.