1. Manuals
  2. Kitchen Appliance Support
  3. Grundig Support
  4. Mixer Support
Support User Manuals
Question About Grundig Mixer un9041
the light keeps flashing and when you turn the dia...

the light keeps flashing and when you turn the dial nothing happens

Asked by audrey on 02/22/2015 5  Answers

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Elke posted an answer 9 years ago

0 The link is not Working.
Same problem here 
Was this answer helpful?

a.brugnoni+manualsonline posted an answer 2 years ago

0
I had this problem as well. The reason is that the small circuit board of the dial is getting loose and turns with the dial on the other side of the dial. Once the dial is set to a speed other than 0 the machine's safety mode will prevent it from starting.
Solution: open up the top (4 screws behind the silver band, you have to cut through the band to access the screws). Press with a screwdriver or similar against the little circuit board towards the dial, so that the little metal thingy on the board is pressed into the dial socket. Make sure the circuit board is standing upright in a 90° angle to the floor. And fixed.
Glue back the metal band or replace it with something else.
Was this answer helpful?

a.brugnoni+manualsonline posted an answer 2 years ago

0
I had this problem as well. The reason is that the small circuit board of the dial is getting loose and turns with the dial on the other side of the dial. Once the dial is set to a speed other than 0 the machine's safety mode will prevent it from starting.
Solution: open up the top (4 screws behind the silver band, you have to cut through the band to access the screws). Press with a screwdriver or similar against the little circuit board towards the dial, so that the little metal thingy on the board is pressed into the dial socket. Make sure the circuit board is standing upright in a 90° angle to the floor. And fixed.
Glue back the metal band or replace it with something else.
Was this answer helpful?

a.brugnoni+manualsonline posted an answer 2 years ago

0
I had this problem as well. The reason is that the small circuit board of the dial is getting loose and turns with the dial on the other side of the dial. Once the dial is set to a speed other than 0 the machine's safety mode will prevent it from starting.
Solution: open up the top (4 screws behind the silver band, you have to cut through the band to access the screws). Press with a screwdriver or similar against the little circuit board towards the dial, so that the little metal thingy on the board is pressed into the dial socket. Make sure the circuit board is standing upright in a 90° angle to the floor. And fixed.
Glue back the metal band or replace it with something else.
Was this answer helpful?

Buddug posted an answer 9 years, 9 months ago

-1 I have exactly the same problem. So infuriating!!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual