1. Manuals
  2. Kitchen Appliance Support
  3. Hotpoint Support
  4. Microwave Oven Support
Support User Manuals
Question About Hotpoint Microwave Oven rvm 43
model rvm 43 removal...

model rvm 43 built-in over the counter m/wave I can't get it to release from wall mount.. already removed mounting screws... any help?

Asked by bill on 10/24/2008 1  Answer

ManualsOnline posted an answer 15 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Benjamin posted an answer 15 years, 10 months ago

5 My model, circa 1982, had the actual microwave enclosed in a metal housing which was attached to the wall studs with 3 lag bolts. After removing every screw I could get to I couldn't get the thing to budge. I then located two bolts in the cabinet above the oven, one far right and one far left, which I removed. This freed the top of the oven from the enclosure. I then removed the bottom panel which exposed the flourescent light bulb, etc. There is a smaller panel there on the right with a sticker "Service only by licensed professional, blah, blah blah". Behind this panel is a wiring harness that needs to be unhooked. Removing the screw from the panel also freed the bottom of the unit from the housing. The microwave then slid out, and I removed the housing from the wall. Keep in mind I had already removed every screw I could find before I figured it out, so some of those screws might have also been holding the whole assembly together.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual