Asked by ittzallgravy on 12/25/2007 3  Answers

ManualsOnline posted an answer 16 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 A file was uploaded I found this manual. KitchenAid KSM90WH Stand Mixer Manual.pdf
Was this answer helpful?
4 From another site: The brushes in my model KP50PSBU must be insert in a particular manner in order for it to work correctly. If you remove the brushes and shine a flashlight into the hole, you should see a small detent or "stop" in one corner of the hole. Its a square hole. Match this corner with the corner of the brush which is shaved off. The brush is not square; it has one corner shaved or smoothed down. This allows the brush to fully extend into the hole. If the brush is inserted any other way, it will not contact the motor and will not run.
Was this answer helpful?
0 I removed the 2 motor brushes from my Kitchen Aid KSM90WH mixer and do not know how to properly reassemble it. Upon rebuilding the mixer, I noticed there is a beveled edge to the brushes and I do not know which direction the beveled side should be facing. Any ideas?
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.