Replace oven door glass

Asked by steven carmichael on 11/23/2013 1  Answer

ManualsOnline posted an answer 10 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 When you fold the oven door down to open position, on the oven body, is there a chrome or metal trim piece that looks like it covers the slot/cavity the door hinge slides into ? I can't see in the schematic. If yes, use a screw driver to remove the cover plate on both sides. Close the door 3/4 then lift firmly, door will release up, and hinges will "snap" as springs release from oven body. Remember, door is heavier without counterbalance springs holding it up. Pretty simple to remove fasteners and remove out door shell, inner glass frames, and get to door glass panel. When replacing door to body, slip hinges into oven body from above and allow door to close all the way then it should slip down onto the hinge pins inside the oven body. You might have to push in on the door a little more than you think to compress door seal and allow hinges to catch. Good luck!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.