1. Manuals
  2. Kitchen Appliance Support
  3. Magic Chef Support
  4. Microwave Oven Support
Support User Manuals
Question About Magic Chef Microwave Oven VM11A-8P
We cannot get the microwave to heat...

We cannot get the microwave to heat

Asked by Fran on 11/08/2014 1  Answer

ManualsOnline posted an answer 10 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

JIMBO posted an answer 10 years ago

0 THE MOST COMMON PROBLEM IS THEUPPER DOOR SWITCH. IF YOU CAN REMOVE THE PLUG SO NO POWER IS THERE, THEN OPEN 2-4 SCREWS AT TOP/HORIZONTAL COVER. REMOVE 1 SCREW ON TOP OF CONTROL PANEL ON THE RIGHT. UNPLUG THE 2 WIRES GOING TO THE TOP LITTLE BLACK SWITCH. YOU CAN SEE THE SWITCH THROUGH THE HOLE THAT THE FINGER FROM THE DOOR STABS INTO. SHUT THE DOOR SLOWLY AND WATCH. THAT SWITCH WITH THE DOOR OPEN SHOULD NOT HAVE ANY CONTINUITY BETWEEN THEM. IF IT DOES IT'S BAD AND SO IS THE FUSE ON THE MOTHER BOARD JUST BEHIND IT. REPLACE THE LITTLE BLACK SWITCH (MICRO SWITCH) THEN REPLACE THE FUSE. IT'S FAIL SAFE SO THE MAGNATRON CANNOT RUN WITH THE DOOR OPEN.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual