1. Manuals
  2. Kitchen Appliance Support
  3. Primo Water Support
  4. Water Dispenser Support
Support User Manuals
Question About Primo Water Water Dispenser 900139-n
no hot water dispensing plugged in and power is on...

no hot water dispensing plugged in and power is on.

Asked by rick tomman on 10/29/2013 1  Answer

ManualsOnline posted an answer 11 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 8 months ago

5 Steps (Tap on step to mark as complete) Step 1 of 5 Ensure the water dispenser is firmly connected to a power outlet. Replace the fuse or reset the circuit breaker if necessary. Step 2 of 5 Replace the water bottle with a new bottle if the bottle is empty or its water level is low. Lift off the old bottle and open the cap on a new bottle before inverting the new water bottle over the top of the dispenser. Move quickly when settling the new bottle on the dispenser to minimize spilling or leaking. Step 3 of 5 Turn the power switches for the hot and cold water on the back of the dispenser to "Off" and wait five minutes. Turn the switches back to "On" and wait 30 minutes before attempting to dispense hot water. Step 4 of 5 Wait several minutes if the water dispenser was recently connected to power before dispensing hot water. This allows time for the heater to operate. Step 5 of 5 Contact the water dispenser distributor or manufacturer for assistance if the hot water continues to malfunction.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual