1. Manuals
  2. Kitchen Appliance Support
  3. RCA Support
  4. Range Support
Support User Manuals
Question About RCA Range plt083-2
heating element...

want to remove heating element from oven. Can I just pop it out or do I need tools

Asked by joe on 10/24/2008 2  Answers

ManualsOnline posted an answer 16 years, 1 month ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Vic Robertson posted an answer 15 years, 11 months ago

5 It is helpful to use a pair of pliers and a needle-nose pliers. You also should use a 1/4" nut driver or socket. Make sure that you shut the power off to the range prior to working on it. Remove the two 1/4" sheet metal screws. Once removed the connectors for the element will pull out enough to be able to grasp the spade connectors with your need nose pliers. With the reg pliers grab the element side of the connector and pull to disconnect. Repeat for the other side. If you have the replacement element re-connect with your new element, otherwise it is advisable to put some electrical tape on the bare connectors until your ready to replace the element. Turn the power back on and your up and running. Good luck.
Was this answer helpful?

g posted an answer 15 years, 9 months ago

0 oven element wont work. Temp will set then it shows temp of 100 but that's all it does Circuits arn't tripped. Any advice
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual