i am looking for instructions to replace the potentimeter-simmer controller, I have the parts

Asked by rodney on 11/23/2013 1  Answer

ManualsOnline posted an answer 10 years, 12 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 All 4 venturi's must be removed to raise top. Sim control in right rear under cover. Front panel must be removed to replace pots, 2 screws under trim left & right, pull down, remove glass, then remove sheet metal cover maybe 6 screws with ERC attached pull forward enough to clear valve stems.If venturi's come out it's a 20 minute job. Here is the breakdown diagram for the Thermador. http://www.appliancepartspros.com/12-schematic-diagram-parts-for-thermador-rdss30-s-n-9707-up.html When replacing do not let any of the wires hit the ground. This will cause a spark at the pot and xlo burner 1 and 2 will both be dead with no gas or spark.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.