Filter
Top Products
DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Operation Manual
16
(16) Confirm the parameters and I/O data in VFD-B and click on “OK”.
2. Configuration of DVPDNET-SL
(1) Double click on DNET Scanner (node 01), and the “Scan Module Configuration..." dialog box will
appear. You can find the currently available nodes, RTU-DNET and VFD-B Drives 230V 3HP, in the
list on the left side. On the right side, there is an empty “Scan List”.
(2) Move the slave devices on DeviceNet in the "Available Nodes” list on the left side to the "Scan
List”on the right side. Select a node and click on
>
. Follow the steps to move all the nodes to the
scan list.