2Wire C11C544001 Coffeemaker User Manual


 
EPSON Stylus Photo RX500
8 - EPSON Stylus Photo RX500 10/03
Lighten or Darken Copies
1. Press the Menu button.
2. Press the bottom left button (next to Copy Layout) until
you see Copy Density.
3. Press the OK button. You see this LCD screen:
4. Press the
l Select button to lighten your copy, or the
r Select button to darken it.
5. Press the OK button to save your setting.
Cancel Copies and Settings
You can cancel a copy job in progress, or cancel the settings
you’ve changed.
To cancel a job in progress, press the x Stop button.
Canceling appears on the LCD screen, and your page is
ejected.
To cancel all settings and return to the defaults, press and
hold the Clear/Reset button until you see Resetting on
the LCD screen.
Printing from a Memory Card
You can print photos directly from your digital camera’s
memory card—and you don’t even have to connect the Stylus
Photo RX500 to a computer.
Printing an Index Sheet
In most cases, you’ll want to print an index sheet before
printing photos from your memory card. An index sheet lets
you see small thumbnail images of the pictures on your card
and select the ones you want to print.
1. Make sure the Stylus Photo RX500 is not connected to your
computer (or your computer is turned off) and the Stylus
Photo RX500 is turned on.
2. Open the memory card cover, and make sure the memory
card light is off and that no cards are in any of the slots.
Then insert your card into the correct slot (see page 3).
Once the card is inserted, the Stylus Photo RX500 reads
and displays the number of printable images on the card.
3. Press the Memory Card button on the control panel.
Print Index appears on the LCD screen.
4. Press OK.
5. Load several sheets of letter-size paper. (If there are more
than 36 images on the card, you will need multiple sheets of
paper.)
6. Press the x Color button to print the index. After the
index sheet prints, Scan Index appears on the LCD
screen.
Selecting Photos To Print
You can select the photos you want to print either by filling in
the ovals on the index sheet and scanning the sheet, or by
selecting photos from the control panel.
Select Photos on an Index Sheet
1. Once you’ve printed the index sheet, fill in the oval beneath
each photo you want to print with a dark pen or pencil.
2. Near the bottom of the form, fill in the correct oval to select
the type and size of paper you want to use. You can select
from these options:
3. Load the type of paper you’ve chosen to print on.
4. Make sure Scan Index appears on the LCD screen, then
press OK. (If it doesn’t appear, press the Memory Card
button, then press the top left button on the LCD screen
until you see Scan Index, then press OK.)
5. Place the index sheet face-down on the scanner glass, so that
the top of the sheet is positioned on the upper left side of
the scanner glass, as you face the scanner. See page 5.
6. Press the x Color button. The form is scanned and your
images are automatically printed.
Select Photos from the Control Panel
1. From a printed index sheet, identify a photo or range of
consecutive photos you want to print.
2. Make sure you’re in memory card mode (if necessary, press
the Memory Card button).
Copy Menu
l - oooo
o
nnnn + r
Option Available paper types
Prem. Glossy - 4 × 6
Prem. Glossy - Letter
Prem. Glossy - 8 × 10
EPSON Premium Glossy Photo Paper
EPSON Premium Semigloss Photo Paper
Glossy - Letter
Glossy - 4 × 6
EPSON Photo Paper
EPSON Glossy Photo Paper
Matte - Letter EPSON Matte Paper Heavyweight
EPSON Double-Sided Matte Paper
Correct
Incorrect