3M 37000 Refrigerator User Manual


  Open as PDF
of 2
 
2
Fig. 1 Fig. 2 Fig. 3
The 3M™ Center Adapter Assembly 6864 consists of a center adapter base, cover, exhalation valve and
adapter gasket. It is secured to the center port of the lens on the 3M™ Full Facepiece 6000 Series with a
bayonet style twist lock connection and sealed with a gasket.
To remove the center adapter from the facepiece:
1. Remove the nose cup assembly by pulling away from center adapter base inside facepiece. (Fig. 1)
2. Grasp center adapter at cover and twist counter-clockwise 1⁄4 turn to disengage bayonet from facepiece
lens.
3. Withdraw center adapter from lens center port.
To install center adapter assembly:
1. Align tabs on center adapter base with notches in center port of facepiece lens. (Fig. 2)
2. Slide adapter into lens port. (Fig. 3)
3. Grasp center adapter at cover and twist clockwise 1⁄4 turn to stop. Be certain center adapter gasket is
properly in place and sealed and that the adapter assembly is fully engaged. (Fig. 3)
4. Replace nose cup assembly.
FOR MORE INFORMATION
In United States, contact:
Internet: www.3M.com/occsafety
Technical Service: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or 1-651-737-6501
3M Occupational Health and
Environmental Safety Division
3M Center, Building 0235-02-W-70
St. Paul, MN 55144-1000
©3M 2005 38-9018-9560-7
 previous