AEG 222D Ventilation Hood User Manual


 
15
8
Removing the filter
Open the grid and remove the stops M to take out the filter. See
Fig. 7.
Carbon filter
The activated carbon filter should only be used if you want to use
the hood in its filtering function.
To do this you will need an original AEG activated carbon filter
(see special accessories).
This filter cannot be cleaned or reused.
As a general rule, the activated carbon filter should be
changed once every four months.
Mounting  Fig 8
a. Fit first rearwards on the proper seats.
b. Then fix frontwards the carbon filter using hooks C.
Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on
the registration plate located on the inside of the unit.
The activated carbon filter can be ordered from the AEG Service
Force.
7