AEG 2490 D Cooktop User Manual


 
51
Introduction
Extractor version
The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting one activated carbon filter (special
accessory).
You will need original AEG carbon filter for this function (see Special
Accessories).
The air is discharged to the outside through a pipe, which must be
fitted to connection flange A. Fig. 1.
In order to obtain the best performance the hose should have a
diameter equal to the outlet hole.
Should there already be a pipe of diameter 125 mm that ducts to
the outside through the walls or roof, it is possible to use the 150/
125 mm reduction flange provided. In this case the hood will be
slightly more noisy.
Fig. 1
Filter Version
The air is filtered through an activated charcoal filter and returned to
the kitchen through the top grill of the outlet pipe.
You will need an original AEG KF20 activated carbon filter for the
filtering function. (See Special Accessories).
Fix the deflector using 4 screws Ø 3,5x6.5 mm. Fig. 2.
Optionally, the position of the chimney elements can be changed.
When using the hood in the filter version the chimney must be fixed
at the top, with the air outlet grill at the side.
A