Filter
Top Products
CAUTION!
Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care
and Cleaning".
Preheating
1. Set function and maximum temperature.
2. Run an empty oven for 45 minutes.
3. Set function
and maximum temperature.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface. Accessories can become more hot
than in normal use. During this period an odour and smoke can be emitted. This is normal.
Make sure the airflow is sufficient.
HOB - DAILY USE
WARNING!
Refer to "Safety information" chapter.
Heat settings
Knob Function
0 Off position
1-3
Heat settings
(1 = lowest heat setting; 3= highest heat setting)
Halfway settings are available between 0 and 3.
1. Turn the control knob to a necessary heat setting.
2. To complete the cooking process, turn the control knob to the “0” position.
Rapid hot plate
A red dot in the middle of the plate shows a rapid hot plate. A rapid hot plate heats up
faster than usual plates.
The red dot is painted on the surface and can come off after some time. It does not have an
effect on the performance of the appliance.
The rapid hot plate can smoke and make an odour when you use it for the first time. The
smoke and an odour will go off after a while.
WARNING!
Risk of burns from residual heat!
10 Hob - Daily Use