Filter
Top Products
24
Setting the Delay Timer
3 With the delay timer you can delay the start of a dishwashing cycle for
between 1 and 19 hours.
1.Press the Delay Timer button repeatedly until the multi-display shows
the desired time delay, for example 12h, if the cycle is to start in
12 hours. The Delay Timer indicator is illuminated.
2.Select dishwashing cycle.
3.The time remaining to the start of the cycle is continuously displayed
(e. g. 12h, 11h, 10h, … 1h etc.).
To change the time delay:
As long as the cycle has not yet started, you can still change the setting
by pressing the DELAY TIMER button.
Cancelling the time delay:
Press the Delay Timer button repeatedly until the length of the selected
cycle appears in the multi-display. The selected dishwashing cycle will
begin immediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still change the dish-
washing cycle. First cancel the dishwashing cycle, then re-set the time
delay, lastly select the new dishwashing cycle.
Switching Off the dishwasher
Do not switch off the dishwasher until the multi-display indicates “0”
for the remaining cycle time.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.
1.Press the ON/OFF button. All display indicators will go out.
2.Turn off the water tap.
1 Carefully open the door. Hot steam may escape.
• Hot dishes are sensitive to knocks. Therefore leave the dishes to cool
for about 15 minutes before removing them. You also get a better
drying result.
• Dishes dry more quickly if you open the door for a moment after the
cycle has ended and then leave it slightly open.