AEG 45003 Dishwasher User Manual


 
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean The selected washing programme is not applicable for the type
of load and soil.
The baskets are loaded incorrectly so that water cannot reach all
surfaces.
Spray arms do not turn freely because of incorrect arrangement
of the load.
The filters are dirty or not correctly installed.
The quantity of detergent is too little or missing.
Limescales particles on the
dishes
The salt container is empty.
The water softener is adjusted on a wrong level.
The salt container cap is not closed correctly.
The dishes are wet and dull No rinse aid has been used.
The rinse aid dispenser is empty.
There are streaks, milky spots
or a bluish coating on glasses
and dishes
Decrease the rinse aid dosage.
Dry water drop signs on
glasses and dishes
Increase rinse aid dosage.
The detergent can be the cause.
TECHNICAL DATA
Dimensions Width cm 59,6
Height cm 85
Depth cm 62,5
Electrical connection - Voltage
- Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher door.
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Capacity Place settings 12
INSTALLATION INSTRUCTIONS
INSTALLATION
Fitting under a counter
WARNING!
Make sure that the mains plug is disconnected from the mains socket during installation.
Technical data
23