Filter
Top Products
Operating Instructions
29
Cleaning the Filter
3
The filters should be checked and
cleaned regularly. Blocked filters will
give poor wash results.
0 1. Open the door, remove the lower
rack.
2. The dishwasher filter system com-
prises a coarse/fine filter, microfilter
and a flat filter. Unlock the filter sys-
tem using the handle on the microfil-
ter, and remove.
3. Turn the handle about ¼ a turn anti-
clockwise and remove.
4. Take hold of the coarse/fine filter (1)
by the handle with the hole and
remove from the microfilter (2)
5. Clean all filters thoroughly under
running water.
6. Remove the flat filter (3) from the
base of the washing compartment
and clean both faces thoroughly
7. Put the flat filter back in the base of
the washing compartment
8. Place the coarse/fine filter in the
microfilter and press together.
9. Put the filter combination in place
and lock by turning the handle clock-
wise to the stop. During this process
ensure that the flat filter does not
protrude above the base of the wash-
ing compartment.
1
The dishwasher must not be used
without filters under any circum-
stances.