AEG 8360 D Ventilation Hood User Manual


 
5
Description of the Appliance
The hood is supplied as an extractor unit and
can also be used with a filtering function
by fitting one charcoal filter.
You will need an original AEG charcoal
filter for this function (Available from your
local AEG Service Force Centre).
Extractor version
In this version fumes are extracted to the
outside via a hose connected to the
coupling ring A. Fig. 1.
In order to obtain the best performance
the hose should have a diameter equal
to the outlet hole.
Should there already be a pipe of diameter 125 mm that ducts to
the outside through the walls or roof, it is possible to use the 150/
125 mm reduction flange provided. In this case the hood will be
slightly noisier.
Filter Version
The air is filtered through an charcoal filter and returned to the
kitchen through the top grill of the outlet pipe.
You will need an original AEG charcoal filter for the filtering function.
(See Special Accessories).
Fix the deflector using 2 screws Ø 2,9x13 mm. Fig. 2.
Optionally, the position of the chimney
elements can be changed.
When using the hood in the filter
version the chimney must be fixed at
the top, with the air outlet grill at the
side.
Fig. 1
Fig. 2