Filter
Top Products
73
90°
Fig. 5
charcoal filter
knobs
cover
Charcoal filter
The charcoal filter should only be used if you want to use the hood in
recirculation mode.
To do this you will need an original charcoal filter (available from your
local Service Force Centre).
The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 4 months under normal
use.
Replacement filters are available from your local Service Force
Centre.
Fitting
Remove the cover by rotating the knobs to 90°, put the charcoal
filter inside and fix it by rotating the knob to 90° then close the
cover. Fig. 5.
To remove proceed in the reverse order.
Always specify the hood model code number and serial number when
ordering replacement filters. This information is shown on the rating
plate located on the inside of the unit.
The charcoal filter can be ordered from your local Service Force
Centre.