Alto-Shaam 100-HW SERIES Oven User Manual


  Open as PDF
of 2
 
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
DUE TO O NGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE S UBJECT TO CHANGE W ITHOUT NOTICE.
PRINTED IN U.S.A.
#08A - 07/08
HOT FOOD DROP-IN WELL 100-HW SERIES
Electrical Cord
60" (1524mm)
One (1) flexible
water-tight tether
30" (762mm)
14"
(355mm)
5-3/16"
(132mm)
5-5/16"
(136mm)
Control
16-1/8"
(409mm)
24-1/8"
(613mm)
7-9/16"
(193mm)
7
-9/16"
(193mm)
2
2-1/16"
(
560mm)
4-7/16"
(113mm)
9
-9/16"
(242mm)
22-1/16"
(
560mm)
HW/D6 DEPTH
HW DEPTH
PRODUCT\PAN CAPACITY
12 lb (5.4 kg)
MAXIMUM (BASED ON 4" DEEP PANS)
MAX. VOLUME: 7.5 qt. (9.5 L)
FULL-SIZE PANS*: One (1) 12" x 20" x 2-1/2"
GN 1/1 (325mm x 530mm x 65mm)
HALF-SIZE PANS*: Two (2) 12" x 10" x 2-1/2"
GN 1/2 (325mm x 265mm x 65mm)
THIRD-SIZE PANS*: Three (3) 12" x 6" x 2-1/2"
GN 1/3 (325mm x 176mm x 65mm)
WEIGHT EST. 100-HW 100-HW/D6
NET WEIGHT: 58 lb (26 kg) 63 lb (29 kg)
SHIP WEIGHT: 90 lb (41 kg) 95 lb (43 kg)
CRATE DIMENSIONS:
19" X 22" X 31"
(H
X W X D) (483mm X 559mm x 787mm)
OPTIONS & ACCESSORIES
PAN DIVIDER BARS
■■
Half-Size • Third-Size . . . . . . . . . . . . . . . . . . . . . . . . .11318
INSTALLATION REQUIREMENTS
Unit must be installed level and must not be installed in any area
where it may be directly affected by steam, grease, dripping water,
high temperatures, or any other severely adverse conditions.
Hot well outer walls can reach 200° to 260°F (93° to 127°C). Verify
countertop material temperature rating with manufacturer before
installing hot well to ensure countertop can withstand heat.
*WILL ALSO ACCEPT 4" (100mm) DEEP PANS; D6 UNITS WILL ACCEPT 6" (153mm) DEEP PANS
HW/D6 DIMENSIONS: L x W x D
EXTERIOR:
24-1/8" x 16-1/8" x 9-9/16" (613mm x 409mm x 242mm)
WELL DIMENSION:
22-1/16" x 14" x 6-3/8" (560mm x 355mm x 162mm)
COUNTER CUTOUT DIMENSION:
22-3/8" x 14-1/4" (568mm x 362mm)
CONTROL BOX CUTOUT REQUIRED:
4-1/2" x 5-1/4" (115mm x 134mm)
ELECTRICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW PLUG CONFIG.
120 1 60 4.8 0.58 NEMA 5-15P
15A-125V PLUG
HW DIMENSIONS: L X W X D
EXTERIOR:
24-1/8" x 16-1/8" x 7-9/16" (613mm x 409mm x 193mm)
WELL DIMENSION:
22-1/16" x 14" x 4-3/8" (560mm x 355mm x 111mm)
COUNTER CUTOUT DIMENSION:
22-3/8" x 14-1/4" (568mm x 362mm)
CONTROL BOX CUTOUT REQUIRED:
4-1/2" x 5-1/4" (115mm x 134mm)
CLEARANCE REQUIREMENTS
4"(102mm)
FROM BOTTOM
L
ENGTH
WIDTH
 previous