Alto-Shaam AR-7H Convection Oven User Manual


  Open as PDF
of 2
 
DUE TO ONGOING PRO DUCT DEVELOPME NT, S PECIFICATIONS ARE SUBJECT TO CHANGE WITHO UT NOTICE.
PRINT ED IN U.S.A.#52B - 06/08
AR-7H
HOT HOLDING ROTISSERIE COMPANION
3
7-1/8" (942mm)
38-1/16" (966mm)
Electrical Connection
34-1/4" (869mm)
40-5/8" (1031mm)
25-1/2" (649mm)
6-3/8" (162mm)
f
or 5" casters
or optional 6" legs
57-1/16" (1449mm)
C
L
Electrical Connection
at base of unit
30-3/8" (722mm)
32-1/16" (814 mm)
25-1/2" (649mm)
58-11/16" (1491mm)
Pass-Through Option
88-11-/16" (2252mm)
61-3/16" (1554mm)
(w/ optional pass-through door)
D IM EN SI ON S: H x W x D
EXTERIOR:
40-5/8" x 38-1/16" x 32-1/16" (1031mm x 966mm x 814mm)
C LE AR AN CE RE QU IR EM EN TS
6" (152mm) left, right, and rear sides
I NS TA LL ATI ON RE QU IR EM EN TS
●
Appliance must be installed level. It must not be
installed in any area where it may be affected by
steam, grease, dripping water, high temperatures,
or any other severely adverse conditions.
●
In order to maintain NSF standards, models
must be sealed at bottom by NSF approved
sealant, equipped with casters, 4" (102mm) legs
for counter models, or 6" (152mm) legs
for floor models.
E LE CT RI CA L
V
OLTAGE PHASE CYCLE
/H
Z AMPS
kW P
LUG
120 1 50/60 15 1.8 NEMA 5
-20P
20A, 125V PLUG
at 208 1 50/60 8.5 1.8 NEMA 6
-15P
15A, 250V PLUG
at 240 1 50/60 9.5 2.3 N
EMA
6-15P
15A, 250V PLUG
230 1 50/60 9.0 2.1 CEE 7/7
220-230V
PLUG
PLUG, CEE 7/7 (SCHUKO)
1
6 AMP 250V (#701410)
P RO DU CT \PA N CA PAC IT Y
60 lbs (27 kg)
MAXIMUM
FULL-SIZE SHEET PANS*:
Eight (8) 18" x 26" x 1" (457mm x 660mm x 25mm)
HALF-SIZE SHEET PANS*:
Up to Sixteen (16) 18" x 13" x 1" (457mm x 330mm x 25mm)
CHICKEN BOATS: Up to 24 (6 per shelf)
*WITH ADDITIONAL WIRE SHELVES
208-240V
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
O PT IO NS & AC CE SS OR IE S
■■
ELECTRONIC CONTROLSPECIFY ON ORDER AS REQUIRED
DOOR, DOUBLE PANE CURVED GLASS
■■
WITH HANDLE 5001202
■■
WITHOUT HANDLE 5001075
■■
DOOR HANDLE HD-26900
(FOR SINGLE PANE GLASS DOOR ON NON-CONTROL SIDE)
■■
CONTROL OPTION KIT 5000886
FOR SOFTWARE DOCUMENTATION
COMPUTER SOFTWARE
■■
HACCP Documentation*
■■
HACCP with Kitchen Management*
CUSTOM PANEL COLORS
■■
BLACK 5001855
■■
BURGUNDY 5001854
■■
CUSTOM COLOR CONTACT FACTORY
LEGS
■■
LEGS, 6" (152mm) ASSEMBLY 5001414
■■
LEGS, 6" (152mm) ASSEMBLY, FLANGED FEET 5001761
SHELF
■■
SHELF, CHROME PLATED WIRE SH-2851
■■
SHELF, STAINLESS STEEL WIRE SH-24720
STAND, STAINLESS STEEL
■■
WITH STORAGE SHELF FR-26550
■■
OPEN (AR-7H OVER 750-S OR 6•10iNES) 5002058
37-1/8" (942mm)
3
8-1/16" (966mm)
Electrical Connection
34-1/4" (869mm)
40-5/8" (1031mm)
25-1/2" (649mm)
6-3/8" (162mm)
for 5" casters
o
r optional 6" legs
57-1/16" (1449mm)
C
L
Electrical Connection
at base of unit
30-3/8" (722mm)
32-1/16" (814 mm)
25-1/2" (649mm)
58-11/16" (1491mm)
Pass-Through Option
88-11-/16" (2252mm)
61-3/16" (1554mm)
(w/ optional pass-through door)
W EI GH T
NET: 260 lb (118 kg) SHIP: 310 lb (141 kg)
CRATED DIMENSIONS (EST.): HXWXD
49" X 50" X 45" (1245mm x 1270mm x 1143mm)
* REFER TO HACCP SPECIFICATION #9015
FOR APPLICABLE PART NUMBERS.
 previous