Alto-Shaam ASC-2E Double Oven User Manual


 
OPERATING INSTRUCTIONS
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 13
A. PRESS MAIN POWER Q “ON.”
•Thedisplay
2
will alternate between last
Cook Set Temperature and actual Cavity
Temperature.
•TheovenwillpreheattopreviousCook
temperature, and the PREHEAT Indicator
1
will illuminate.
To terminate procedure,
press START/STOP key
L
twice.
B. IF THE PREVIOUS COOK CYCLE IS
ACCEPTABLE, PROCEED TO STEP C.
1. to Cook by timE:
•PressCOOK H
•PresslitTIME Key J
•Confirmfanspeed.
•Adjustthecookingtemperaturewiththe
UP or DOWN arrow keys C.
Note: The TIME Indicator D will remain lit.
2. to Cook by probE (optionAl):
•PressCOOK H
•PresslitPROBE Key I
•Confirmfanspeed.
•Adjustthecookingtemperaturewiththe
UP or DOWN arrow keys C.
Note: The PROBE Indicator F
will remain lit.
Note: If more than 5 seconds elapse
before a decision is made, the mode button
must be pushed again to continue.
C. WHEN THE COOK PREHEAT TEMP. HAS
BEEN REACHED:
•TheSTART Key L and READY Indicator A
will flash.
•Thecontrolwillproduceanaudiblebeepevery
30 seconds.
1. LOAD PRODUCT IN A TIMELY MANNER.
a. to Cook by timE:
•Thedisplay
B
will alternate between
cook cycle temperature and remaining
cooking time when cooking by TIME.
b. to Cook by probE (optionAl):
•Ifcookingbyprobe,removeprobefrom
its bracket, wipe the probe tip with a
disposable alcohol pad and properly insert
probe into product.
•The display will alternate between set
cooking temperature, probe temperature,
and elapsed time when cooking by PROBE.
2. CLOSE THE OVEN DOOR -- PRESS
START KEY.
3. AFTER COOK CYCLE IS COMPLETE AND
PRODUCT IS READY:
• Thedisplaywillindicate“DONE”.
• TheSTART/READY indicates will flash,
and the oven will beep every 30 seconds.
4. REMOVE PRODUCT PROMPTLY TO
AVOID OVERCOOKING.
To terminate procedure,
press START/STOP key twice.
D. COOLING THE OVEN:
Open door.
Press COOL DOWN key
P
.
1. Cool ContinuouSly
• Fanwillruncontinuously.
• ShutoffPOWERtoterminate.
2. SEt Cool down tEmpErAturE
•Setdesiredcooldowntemperaturewith
UP/DOWN arrows
C
. The cool down
temperature ranges from 80° to 450°F.
•Fanwillruncontinuously.
•Whenthedesiredcooldowntemperature
is reached, “COOL/STOP” will light on
the LED, and the oven will beep every
30 seconds.
Note: If more than 4 seconds elapse
before a decision is made, the mode button
must be pushed again to continue.
NOTE: START/STOP key will stop fan, and
terminate the COOL/DOWN feature.
E. AT THE END OF THE DAY, SHUT OFF OVEN
POWER BEFORE LEAVING THE PREMISES.
ELECTRONIC CONTROL OPERATION