Alto-Shaam ED2-72 Food Warmer User Manual


  Open as PDF
of 2
 
ED2-72 SERIES
ED2SYS-72 SERIES
HEATED DISPLAY SYSTEMS
D IME NS ION S (HXWXD)
EXTERIOR, COUNTER-TOP MODEL WITH LEGS:
29-3/4" x 72" x 44-5/16" (756mm x 1829mm x 1125mm)
EXTERIOR, WITH BASE:
47-11/16" x 72" x 47-1/8" (1212mm x 1829mm x 1196mm)
WELL DIMENSIONS (WXLXD):
27-3/16" x 69-5/16" x 4-1/2" (690mm x 1760mm x 114mm)
IN STA LLAT IO N R EQUI REMENTS
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source
such as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
WEIGH T
MODEL NET SHIP
ED2-72 419 lb (190 kg) 465 lb (210 kg)
ED2SYS-72 621 lb (282 kg) 690 lb (313 kg)
ED2-72/P 450 lb (204 kg) 500 lb (227 kg)
ED2SYS-72/P 661 lb (299 kg) 735 lb (345 kg)
ED2-72/PL; /PR 432 lb (197 kg) 480 lb (295 kg)
ED2SYS-72/PL; /PR 643 lb (318 kg) 715 lb (363 kg)
CRATED DIMENSIONS (EST.): HXWXD
ED2-72: 45" x 85" x 55" (1143mm x 2159mm x 1397mm)
ED2SYS-72: 65" x 85" x 55" (1651mm x 2159mm x 1397mm)
SPECI FICATIO NS
●
Ten (10) overhead lights with two (2) light zones.
●
Two (2) base heat zones with two (2) adjustable thermostats with
a range of 1 through 10, and two (2) heat-on indicator lights.
●
Three (3) tinted, reflective, tempered glass sliding doors on
operator side.
●
One (1) 10" x 60" (254mm x 1524mm) operator-side work shelf.
●
Self-serve model ED2-72/P has a self-serve pan insert
26-7/16" x 69-3/16" x 2" (672mm x 1757mm x 51mm) and
includes three (3) Wire Pan Grids.
●
Self-serve models ED2-72/PL and ED2-72/PR have a self-serve
pan insert 21-5/8" x 26-7/16" x 2" (549mm x 672mm x 51mm)
and includes one (1) Wire Pan Grid.
OPTIO NS & ACCE SSORI ES
■■
BUTTING KIT 5008523
■■
CARVING STATION 5001874
GAUGE, INTERIOR AMBIENT TEMP.
■■
FULL-SERVICE CASES & SELF-SERVICE FULL CASES 5004182
■■
SELF-SERVICE LEFT-SIDE OF CASES 5004183
■■
SELF-SERVICE RIGHT-SIDE OF CASES 5004184
■■
GLASS, TEMPERED END PANE, BRONZE KIT 5001143
■■
INDEPENDENT ELECTRICAL OUTLET 5001781
PANEL KIT, COUNTER TOP
■■
BRUSHED STAINLESS STEEL 5001282
■■
CUSTOM COLOR P152
PANEL KIT, SYSTEM
■■
BRUSHED STAINLESS STEEL 5001295
■■
CUSTOM COLOR P155
■■
PAN INSERT, SELF-SERVICE 4" (102mm) DEEP 1001991
PLATFORM SCALE
■■
LEFT-HAND 5001308
■■
RIGHT-HAND 5001307
SHEET PAN DIVIDER BAR PACKAGE
■■
FULL-SERVICE 5002803
■■
SELF-SERVICE LEFT-SIDE OR RIGHT-SIDE OF CASES 5002804
■■
TEMPERATURE PROBE 5004917
■■
THERMOSTAT GUARD COVER PLATE 5007660
■■
WORK SHELF WITH GRAVY LANE 5005639
PAN CONFI GURATIO N*
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-THIRD**: 12" X 20" X 2-1/2" (GN 1/1) 5
12" X 6" X 2-1/2" (GN 1/3) 5
HALF-SIZE & ONE-THIRD**: 12" X 10" X 2-1/2" (GN 1/2) 10
12" X 6" X 2-1/2" (GN 1/3) 5
FULL-SIZE SHEET PANS: 18" X 26" X 1" 3
MAX. CAPACITY/VOLUME: 80 lbs (36 kg)
50 qts (60 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.
ELECTR ICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW
120/208-240 (UL)1 50/60 18.75 4.6
at 208 1 50/60
19.0 4.5
at 240 1 50/60 19.0 4.5
230 (C
E
) 1 50/60 18.3 4.2
230 1 50/60 18.4 4.2
380-415 3 50/60 10.5 4.4
BARE END, NO PLUG
NEMA L14-30P
30A, 250V PLUG
BARE END, NO PLUG
26-1/8" (664mm)
29-3/4" (756mm)
44-5/16" (1125mm)
32-15/16" (837mm)
34-1/4" (870mm)
4" (102mm)
4
7-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
48" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
72" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3
" (76mm) ADJUSTABLE 
P
EGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
9
6" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
26-1/8" (664mm)
29-3/4" (756mm)
4
4-5/16" (1125mm)
32-15/16" (837mm)
3
4-1/4" (870mm)
4
" (102mm)
47-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
48" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
P
EGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
72" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
96" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
26-1/8" (664mm)
29-3/4" (756mm)
44-5/16" (1125mm)
32-15/16" (837mm)
34-1/4" (870mm)
4" (102mm)
4
7-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
4
8" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
72" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
96" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
ED2SYS-72
ED2SYS Profile
ED2 Profile
DUE TO ON GOING PRODUCT DEVELOPMEN T, SPECIF ICATIO NS ARE SUB JE CT TO C HA NGE WITHOUT NO TI CE .
PRI NTED I N U .S.A.#68A - 06/08
 previous