Alto-Shaam ED2SYS-96 Kitchen Grill User Manual


  Open as PDF
of 2
 
ED2-96 SERIES
ED2SYS-96 SERIES
HEATED DISPLAY SYSTEMS
DIMENSIO NS (HXWXD)
EXTERIOR, COUNTER-TOP MODEL WITH LEGS:
29-3/4" x 96" x 44-5/16" (756mm x 2438mm x 1125mm)
EXTERIOR, WITH BASE:
4
7-11/16" x 96" x 47-1/8" (1212mm x 2438mm x 1196mm)
WELL DIMENSIONS (WXLXD)
:
27-3/16" x 93-5/16" x 4-1/2" (690mm x 2370mm x 114mm)
INSTALLATION REQUIREM ENTS
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source
such as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
WEIGHT
MODEL NET SHIP
ED2-96 526 lb (239 kg) 585 lb (265 kg)
ED2SYS-96 716 lb (325 kg) 796 lb (361 kg)
ED2-96/PL; /PR 535 lb (243 kg) 595 lb (270 (kg)
ED2SYS-96/PL; /PR 734 lb (333 kg) 816 lb (370 kg)
CRATED DIMENSIONS (EST.): HXWXD
ED2-96: 45" x 100" x 55" (1143mm x 2540mm x 1397mm)
ED2SYS-96: 65" x 100" x 55" (1651mm x 2540mm x 1397mm)
SPECIFIC ATIONS
●
Fourteen (14) overhead lights in three (3) light zones.
●
Three (3) base heat zones with three (3) adjustable thermostats with
a range of 1 through 10, and three (3) heat-on indicator lights.
●
Four (4) tinted, reflective, tempered glass sliding doors on
operator side.
●
Two (2) 10" x 36" (254mm x 914mm) operator-side work shelves.
●
Self-serve models ED2-96/PL and ED2-96/PR have a self-serve
pan insert 21-5/8" x 26-7/16" x 2" (549mm x 672mm x 51mm)
and includes one (1) Wire Pan Grid.
#68B - 03/08 DUE TO ON GOING PRODUCT DEV EL OPMEN T, SPECIF ICATIO NS ARE SUB JE CT TO CHANGE WI TH OUT NOTICE. PRIN TE D IN U.S .A.
26-1/8" (664mm)
29-3/4" (756mm)
44-5/16" (1125mm)
3
2-15/16" (837mm)
34-1/4" (870mm)
4" (102mm)
47-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
48" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
7
2" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
P
EGS IN EACH CORNER
9
6" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
26-1/8" (664mm)
29-3/4" (756mm)
44-5/16" (1125mm)
32-15/16" (837mm)
34-1/4" (870mm)
4" (102mm)
4
7-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
48" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
72" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3
" (76mm) ADJUSTABLE 
P
EGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
9
6" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
26-1/8" (664mm)
29-3/4" (756mm)
44-5/16" (1125mm)
32-15/16" (837mm)
34-1/4" (870mm)
4" (102mm)
47-1/8" (1196mm)
26-7/16" (672mm)
47-11/16" (1212mm)
27-3/16" (691mm)
48" (1219mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
72" (1829mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL PANEL
ELECTRICAL OUTLET
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
96" (2438mm)
26-1/8" (664mm)
20-3/16"
(513mm)
47-11/16" (1212mm)
ELECTRICAL PANEL
ELECTRICAL OUTLET
ED2SYS-96
ED2SYS Profile
ED2 Profile
OPTIONS & AC CESSORI ES
■■
BUTTING KIT 5008523
■■
CARVING STATION 5001874
GAUGE, INTERIOR AMBIENT TEMP.
■■
FULL-SERVICE CASES 5004185
■■
SELF-SERVICE LEFT-SIDE OF CASES 5004186
■■
SELF-SERVICE RIGHT-SIDE OF CASES 5004187
■■
GLASS, TEMPERED END PANE, BRONZE KIT 5001143
■■
INDEPENDENT ELECTRICAL OUTLET 5001781
PANEL KIT, COUNTER TOP
■■
BRUSHED STAINLESS STEEL 5001283
■■
CUSTOM COLOR P153
PANEL KIT, SYSTEM
■■
BRUSHED STAINLESS STEEL 5001297
■■
CUSTOM COLOR P156
PLATFORM SCALE
■■
LEFT-HAND 5001308
■■
RIGHT-HAND 5001307
SHEET PAN DIVIDER BAR PACKAGE
■■
FULL-SERVICE 5002805
■■
SELF-SERVICE LEFT-SIDE OR RIGHT-SIDE OF CASES 5002806
■■
TEMPERATURE PROBE 5004918
■■
THERMOSTAT GUARD COVER PLATE 5007660
■■
WORK SHELF WITH GRAVY LANE 5005640
ELECTRICA L
VOLTAGE PHASE CYCLE/HZ AMPS kW
120/208-240 (UL)1 50/60 24.0 5.2
a
t 208 1 50/60 24.0 5.2
at 240 1 50/60 24.0 5.2
230
(C
E
) 1 50/60 24.3 5.6
230 1 50/60 24.7 5.7
380-415 3 50/60 11.5 6.5
BARE END, NO PLUG
T
yler Huss.eps
revised 5/30/02
added L14-20P Plug Configuration
NEMA L14-30P
30A, 250V PLUG
BARE END, NO PLUG
PAN CONFIGUR ATION*
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-THIRD**: 12" X 20" X 2-1/2" (GN 1/1) 7
12" X 6" X 2-1/2" (GN 1/3) 7
HALF-SIZE & ONE-THIRD**: 12" X 10" X 2-1/2" (GN 1/2) 14
12" X 6" X 2-1/2" (GN 1/3) 7
FULL-SIZE SHEET PANS: 18" X 26" X 1" 4
MAX. CAPACITY/VOLUME: 112 lbs (51 kg)
70 qts (84 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.
 previous