Alto-Shaam HN2-48 Food Warmer User Manual


  Open as PDF
of 2
 
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
DUE TO O NGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE S UBJECT TO CHANGE W ITHOUT NOTICE.
PRINTED IN U.S.A.
IN STAL LATI ON R EQ UI RE ME NT S
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source
such as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
OP TI ON S & AC CE SS OR IE S
■■
BUTTING KIT 5009003
■■
GAUGE, INTERIOR AMBIENT TEMP. GU-33384
■■
GLASS, TEMPERED END PANE, BRONZE KIT 5008529
■■
PAN INSERT, SELF-SERVICE 4" (102mm) DEEP 1001990
■■
PLATFORM SCALE 55265
■■
SHEET PAN DIVIDER BAR PACKAGE 5002802
■■
TEMPERATURE PROBE 5004916
■■
THERMOSTAT GUARD COVER PLATE 5007660
■■
WORK SHELF WITH GRAVY LANE 5005638
4
1-15/16" (1065mm)
5
1-3/4" (1312mm)
13-1/2"
(344mm)
37-3/4" (958mm)
28-1/8" (713mm)
28-5/8" (726mm)
30-3/4" (781mm)
14-15/16"
(378mm)
51-3/4" (1312mm)
52-3/8" (1328mm)
4
1-15/16" (1065mm)
48" (1219mm)
37-3/4" (958mm)
14-15/16"
(378mm)
52-3/8" (1328mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
E
LECTRICAL CORD
6-13/16"
(
172mm)
3
-1/8"
(77mm)
HN2SYS-48
HN2SYS Profile
HN2 Profile
#94 - 10/08
HN2-48 SERIES
HN2SYS-48 SERIES
HEATED DISPLAY SYSTEMS
DI ME NS IO NS (HXWXD)
EXTERIOR, COUNTER-TOP MODEL WITH LEGS:
37-3/4" x 48" x 51-3/4" (958mm x 1219mm x 1312mm)
EXTERIOR, WITH BASE:
52-3/8" x 48" x 51-3/4" (1328mm x 1219mm x 1312mm)
W
ELL DIMENSIONS
(W
XLXD
):
27-3/16" x 45-5/16" x 4-1/2" (690mm x 1151mm x 114mm)
WE IG HT (EST.)
MODEL NET SHIP
HN2-48 305 lb (138 kg) 380 lb (172 kg)
HN2SYS-48 350 lb (159 kg) 425 lb (193 kg)
HN2-48/P 305 lb (138 kg) 380 lb (172 kg)
HN2SYS-48/P 350 lb (159 kg) 425 lb (193 kg)
CRATED DIMENSIONS (EST.): HXWXD
HN2-48: 45" x 60" x 55" (1143mm x 1524mm x 1397mm)
HN2SYS-48: 60" x 60" x 66" (1524mm x 1524mm x 1664mm)
SP EC IF IC ATI ON S
●
Six (6) overhead lights with two (2) light zones.
●
Two (2) base heat zones with two (2) adjustable thermostats with
a range of 1 through 10, and two (2) heat-on indicator lights.
●
Two (2) tinted, reflective, tempered glass sliding doors on
operator side.
●
One (1) 10" x 36" (254mm x 914mm) operator-side work shelf.
●
Self-serve model HN2-48/P has a self-serve pan insert
26-7/16" x 45-3/16" x 2" (672mm x 1148mm x 51mm) and
includes two (2) Wire Pan Grids.
41-15/16" (1065mm)
51-3/4" (1312mm)
13-1/2"
(344mm)
37-3/4" (958mm)
28-1/8" (713mm)
28-5/8" (726mm)
30-3/4" (781mm)
1
4-15/16"
(
378mm)
51-3/4" (1312mm)
52-3/8" (1328mm)
41-15/16" (1065mm)
48" (1219mm)
37-3/4" (958mm)
14-15/16"
(378mm)
52-3/8" (1328mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
E
LECTRICAL CORD
6-13/16"
(
172mm)
3
-1/8"
(77mm)
4
1-15/16" (1065mm)
5
1-3/4" (1312mm)
13-1/2"
(344mm)
37-3/4" (958mm)
28-1/8" (713mm)
28-5/8" (726mm)
30-3/4" (781mm)
14-15/16"
(378mm)
51-3/4" (1312mm)
52-3/8" (1328mm)
4
1-15/16" (1065mm)
48" (1219mm)
37-3/4" (958mm)
14-15/16"
(378mm)
52-3/8" (1328mm)
3" (76mm) ADJUSTABLE 
PEGS IN EACH CORNER
ELECTRICAL CORD
6-13/16"
(
172mm)
3
-1/8"
(77mm)
PA N CO NF IG UR AT IO N*
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-THIRD**: 12" X 20" X 2-1/2" (GN 1/1) 3
12" X 6" X 2-1/2" (GN 1/3) 3
HALF-SIZE & ONE-THIRD**: 12" X 10" X 2-1/2" (GN 1/2) 6
12" X 6" X 2-1/2" (GN 1/3) 3
FULL-SIZE SHEET PANS: 18" X 26" X 1" 2
MAX. CAPACITY/VOLUME: 48 lbs (22 kg)
30 qts (36 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.
EL EC TR IC AL
VOLTAGE PHASE CYCLE/HZ AMPS kW
120/208-240 (A
GY
)
1
50/60 13.8
3.3
at 208
1
50/60
11.6
2.5
at 240
1
50/60
13.0
3.1
230 (A
GY
)
1
50/60 12.6 2.9
BARE END, NO PLUG
230
1
50/60 12.6 2.9
NEMA L14-20P
20A, 250V PLUG
 previous