Alto-Shaam PD2SYS-72 Food Warmer User Manual


  Open as PDF
of 2
 
PD2SYS-72 SERIES
HEATED DISPLAY SYSTEMS
D IME NS ION S (HXWXD)
EXTERIOR, WITH PEDESTAL STYLE BASE:
47-3/4" x 72" x 44-1/16"
(1213mm x 1829mm x 1121mm
)
WELL DIMENSIONS (WXLXD)
:
27-3/16" x 69-5/16" x 4-1/2"
(690mm x 1760mm x 114mm)
26-1/2" (674mm)
8-5/16"
(211mm)
26-11/16 (678mm)
HEIGHT TO CUTTING BOARD
47-3/4" (1213mm)
21-3/8"
(543mm)
12-9/16"
(320mm)
4
4-1/16" (1121mm)
4
8" (1219mm)
ELECTRICAL CORD
6-13/16"
(
173mm)
19-3/4" (502mm)
TERMINAL
BLOCK
47-3/4" (1213mm)
47-3/4" (1213mm)
47-3/4" (1213mm)
9
6" (2438mm)
E
LECTRICAL CORD
6-13/16"
(
173mm)
ELECTRICAL CORD
6-13/16"
(173mm)
3
6" (915mm)
1
8" (456mm)
1
8" (456mm)
1
8" (456mm) 18" (456mm)
7
2" (1829mm)
TERMINAL
B
LOCK
TERMINAL
B
LOCK
19-3/4" (502mm)
19-3/4" (502mm)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
W EIG HT
MODEL NET SHIP
PD2SYS-72 674 lb (306 kg) 774 lb (351 kg)
CRATED DIMENSIONS (EST.): HXWXD
82" X 50" X 57" (2083mm x 1270mm x 1448mm)
2
6-1/2" (674mm)
8-5/16"
(211mm)
26-11/16 (678mm)
HEIGHT TO CUTTING BOARD
47-3/4" (1213mm)
21-3/8"
(543mm)
12-9/16"
(320mm)
4
4-1/16" (1121mm)
48" (1219mm)
ELECTRICAL CORD
6
-13/16"
(173mm)
19-3/4" (502mm)
T
ERMINAL
B
LOCK
47-3/4" (1213mm)
47-3/4" (1213mm)
47-3/4" (1213mm)
96" (2438mm)
ELECTRICAL CORD
6-13/16"
(173mm)
E
LECTRICAL CORD
6-13/16"
(173mm)
3
6" (915mm)
18" (456mm)
18" (456mm)
18" (456mm) 18" (456mm)
7
2" (1829mm)
TERMINAL
B
LOCK
TERMINAL
BLOCK
19-3/4" (502mm)
19-3/4" (502mm)
PD2SYS Profile
PD2SYS-72
#99A - 03/08 DUE TO ONGOING PRODUC T DEVE LO PMENT, SP ECIFIC AT IO NS AR E SUBJ EC T TO C HA NG E WITH OUT NOTICE. PRINTED IN U.S .A.
I NSTAL LATION REQ UIREME NTS
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source such
as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
SPECIF ICATIONS
●
Ten (10) overhead lights with two (2) light zones.
●
Two (2) base heat zones with two (2) adjustable thermostats with a
range of 1 through 10, and two (2) heat-on indicator lights.
●
Three (3) tinted, reflective, tempered glass sliding doors on
operator side.
●
One (1) 10" x 60" (254mm x 1524mm) operator-side work shelf.
OPTIONS & AC CESSOR IES
■■
BUTTING KIT CONTACT FACTORY
■■
CARVING STATION. 5001874
■■
GAUGE, INTERIOR AMBIENT TEMP. GU-33384
■■
GLASS, TEMPERED END PANE, BRONZE KIT 5008531
■■
INDEPENDENT ELECTRICAL OUTLET 5001781
■■
PAN INSERT, SELF-SERVICE 4" (102mm) DEEP 1001991
PANEL KIT, SYSTEM
■■
BRUSHED STAINLESS STEEL 5005145
■■
CUSTOM COLOR 5005148
PLATFORM SCALE
■■
LEFT-SIDE 5005338
■■
RIGHT-SIDE 5005337
SHEET PAN DIVIDER BAR PACKAGE
■■
FULL-SERVICE & SELF-SERVICE FULL CASES 5002803
■■
SELF-SERVICE LEFT-SIDE OR RIGHT-SIDE OF CASES 5002804
■■
TEMPERATURE PROBE 5004917
■■
THERMOSTAT GUARD COVER PLATE 5007660
PA N CONF IGURATIO N*
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-THIRD**: 12" X 20" X 2-1/2" (GN 1/1) 5
12" X 6" X 2-1/2" (GN 1/3) 5
HALF-SIZE & ONE-THIRD**: 12" X 10" X 2-1/2" (GN 1/2) 10
12" X 6" X 2-1/2" (GN 1/3) 5
FULL-SIZE SHEET PANS: 18" X 26" X 1" 3
MAX. CAPACITY/VOLUME: 80 lbs (36 kg)
50 qts (60 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.
ELECTRI CAL
VOLTAGE PHASE CYCLE/HZ AMPS kW
120/208-240 (UL)1 50/60 18.75 4.5
at 208 1 50/60 19.0 4.6
at 240 1 50/60 19.0 4.6
230
(CE) 1 50/60 18.3 4.2
230 1 50/60 18.4 4.2
BARE END, NO PLUG
BARE END
, NO PLUG
 previous