Filter
Top Products
7
Installation
Full-Length Aluminum Handles
To Install:
1. Release top door trim by removing
Phillips screws from top of fresh food
door and retain screws for later use.
2. Align notches on back of handle with
retaining clips on doors. Insert
clips into notches and slide
handle down until it contacts
bottom trim.
3. Replace top door trim and Phillips
screws.
4. Repeat instructions 1-3 to install
other handle.
To avoid possible injury and damage to property,
tape decorative panels (select models) securely into
place before removing door handles.
WARNING
To Remove:
1. Release top door trim by removing
Phillips screws from top of fresh food
door and retain screws for later use.
2. Grasp handle firmly with both hands.
Slide handle upward approximately
3
⁄4” to release.
3. Repeat instructions 1-3 to
remove other handle.
To Reinstall:
1. Repeat in reverse order.
Handle Extensions (select models)
To Install:
1. Align and clip handle extension into position on the
handle. Press the extension over the door retainers.
To Remove:
1. Slide the extension down and unclip from door
retainer.
Door Clip
5. Grasp the handle firmly and slide
down.
To Remove:
1. Grasp the lower part of the handle firmly,
slide up, lift and remove from the
surface.