Filter
Top Products
30
Troubleshooting
Ice maker is not
producing ice
Temp Alarm Light
is flashing
All lights on
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
alarm sounded
Temperatures in
display look too low
PROBLEM
POSSIBLE CAUSES
• Ice maker switch is not ON
• Household water supply is not
reaching water valve.
• Copper tubing has kinks.
• Water pressure is too low.
• Check freezer temperature.
• Inner fountain door is blocked or
frozen.
• Exceeded normal operating
temperatures.
• Control has been set to Sabbath
Mode.
• Alarm mode has been disabled.
• Temperature display has been set to
Celsius rather than Fahrenheit.
• Confirm ice maker switch is ON. See
Automatic Ice
Maker, pages 12-13.
• See Connecting the Water Supply, pages 8-9.
• Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
• Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
• See Temperature Controls, pages 10 and 11. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
• Do not attempt to free the fountain door by
continuously pressing the dispenser button. Contact
qualified service technician.
• See Temp Alarm, page 11.
• See, Sabbath Mode, page 11.
• To activate audible alarms, refer to page 11.
• See Temperature display on page 10.
WHAT TO DO