14
Freezer features
Primary features
AUTOMATIC ICE MAKER
(SOME MODELS)
Using Ice Maker for the First Time
1. Confirm ice bin is in
place and ice maker
arm is down.
2. After freezer section reaches between
0° to 2° F (-18° to -17° C), ice maker
fills with water and begins operating.
3. Allow approximately 24 hours after
installation to receive first harvest of
ice.
4. Discard ice created within first 12
hours of operation to verify system is
flushed of impurities.
Operating Instructions
1. Confirm ice bin is in place and ice
maker arm is down.
2. After freezer section reaches 0° to 2° F
(-18° to -17° C), ice maker fills with
water and begins operating. You will
have a complete harvest of ice
approximately every 3 hours.
3. Stop ice production
by raising ice maker
arm until click is
heard.
4. Ice maker will remain in the off posi-
tion until arm is pushed down.
To avoid property damage, observe
the following:
➢ Do not force ice maker arm down
or up.
➢ Do not place or store anything in
ice storage bin.
CAUTION
To prevent accidental child entrap-
ment or suffocation risk, DO NOT
remove the divider in the top freezer
basket.
DANGER
Drawers
PULLOUT DRAWER
BASKETS (SOME MODELS)
(Door assembly of drawer removed from
illustration for visual clarity)
To remove and replace top basket:
➢ Remove basket by pulling basket out
to its full extension and lift out.
➢ Replace basket by sliding into upper
molded railing.
To remove and replace bottom basket:
➢ Remove basket by lifting basket from
rail guides.
➢ Replace basket by placing into rail
guides.
Accessories
LOWER BASKET DIVIDER
(SOME MODELS)
The lower basket divider allows the
option to organize the basket area into
sections.
To remove and replace divider:
➢ To remove, pull divider straight up.
➢ To install, hook top corners of divider
over top horizontal basket rungs.