Amana ARS2667BS Refrigerator User Manual


 
19
Dispenser features
NOTE:
During initial use of water dispenser,
there will be a 1- to 2-minute delay
while water tank fills before water
dispenses. Discard first 10-14
containers of water after initially
connecting refrigerator to household
water supply and after extended
periods of nonuse.
To use dispenser pad:
Choose water selection from
dispenser control panel.
Press sturdy, wide-mouthed container
against dispenser pad. When
dispensing crushed ice, hold
container as close to chute as
possible to reduce spraying.
Release pressure on dispenser pad
to stop water from dispensing. A
small amount of water may continue
to dispense and collect in dispenser
tray. Large spills should be wiped dry.
Water d is pen se r
operation
To avoid personal injury or
property damage, observe the
following:
DO NOT put fingers, hands or any
foreign object into dispenser opening.
DO NOT use sharp objects to
break ice.
DO NOT dispense ice directly into
thin glass, fine china or delicate
crystal.
CAUTION
Dispenser light
A light activates within the dispenser
area at full power when dispensing ice
or water.
Dispenser pad
The Dispenser Pad is located on the
back wall of the dispensing area. When
the dispenser pad is pressed, the
selection chosen on the dispenser
control panel will dispense.
Dispenser
Pad
Removable
Tray
Removable tray
The Removable Tray at the bottom of
the dispenser area is designed to collect
small spills and may be easily removed
for cleaning and emptying purposes.
IMPORTANT: Removable tray does not
drain. Continuous water running into tray
will cause tray to overflow.
FRONT FILL BUTTON
(SELECT MODELS)
The Front Fill Button works
independently of the dispenser controls,
providing an up-front alternative to the
dispenser pad for dispensing water. This
feature is convenient for filling large
items that will not fit into the dispenser
area (i.e. sport bottles, pitchers, large
pans, coffee pots).
This feature allows added convenience
of dispensing ice and water
simultaneously. To use, choose your
preferred ice mode from dispenser
control panel. Press container against
dispenser pad while pressing the Front
Fill button.
Front Fill
Button