Amana ARS8267BB Refrigerator User Manual


 
15
DOOR BUCKETS
Door Buckets adjust to meet individual
storage needs.
To remove, slide bucket
up and pull straight out.
To install,
reverse above
procedure.
Climate-controlled
drawers
HUMIDITY-CONTROLLED
CRISPER DRAWERS
Crisper drawers are designed for fruit
and vegetable storage.
Controls
Some crisper drawers are designed with
an adjustable humidity control located
above the drawers. Slide the control to
the right for fruit storage (lower humidity)
or to the left for vegetable storage
(higher humidity).
To remove and install drawer:
To remove, pull drawer out to full
extension. Tilt up front of drawer and
pull straight out.
To install, guide drawer into frame
and push back until drawer is flush
with rear wall.
To remove and install shelf:
To remove, lift shelf from wall
supports.
To install, lower shelf onto wall
supports and push in until shelf is
flush with rear wall.
PRODUCE STORAGE TIPS
Please observe the following rules when
storing produce in humidity-controlled
crisper drawers:
DO NOT wash produce before
placing in crispers. Any additional
moisture added to the drawers may
cause produce to prematurely spoil.
DO NOT line crispers with paper
towels. Towels will retain moisture.
Follow control instructions carefully.
Not setting controls correctly may
damage produce.
DAIRY CENTER
The Dairy Center provides convenient
storage for items such as butter, yogurt,
cheese, etc.
This compartment is an adjustable
feature located in the door. It can be
moved to several different locations to
accommodate storage needs.
To remove and install bin:
To remove, slide
dairy center up
and pull out.
To install, slide
assembly in
above desired door liner retainer and
push down until it stops.
To remove and install dairy door:
To remove, press in sides of dairy
door and pull out.
To install, slide sides of dairy door
inside dairy center until hinge points
snap into place.
TILT-OUT DOOR BUCKETS
(SELECT MODELS)
The Tilt-Out Bucket assembly consists
of a bucket and frame, providing
adjustable, convenient storage for food
items in door. The bucket assembly tilts
forward for easy access of items, and
lifts out for ease in cleaning and
adjusting.
To remove and install bucket:
To remove
bucket, tip bucket
forward and pull
straight out to
remove.
To install bucket, slide bucket into
bucket frame and push bucket
upright.
To adjust bucket frame:
Remove bucket per
above instructions.
Lift frame off door
support and place in
desired door location.