Filter
Top Products
1. "SET" installment in Bracket Base 3. Fixing 'location screw' in cabinet 5. Installment of Bracket Bottom 7. Installment of Trim Frame
Remove 4 screws from the lower right and left parts
of outer panel, place "SET" in Bracket Base and fix
it by tightening 4 screws again.
2. installment of Bracket Left
Assemble the Bracket Left to outer panel.
With product, use boxed screw(4 x 20 ram).
Leave the screws protruding from
a minimum of 3.5 to a maximum of 4.5 mm
4,5 mmm_
Fix '1" screw' at the bottom of cabinet with use of
template 1.
4. "SET" installment in cabinet
Push "SET" into the cabinet inside so that the fixed
bottom screw of cabinet can place in the hole of
Bracket Bottom.
Push "SET" in until the bent part of front Bracket
Base touches the front of cabinet.
Place Bracket Bottom on Bracket Base like picture
B. Make holes of position A fit to Bracket Base's
and fix screws after making holes with a 7/64 drill or
a #35 drill.
Install "Bracket Bottom" by tightening screws at
screw points.
6. installment of Bracket Top
install Trim Frame to make contact cabinet.
8. installment of Trim Frame
Fix 2 screws each at the upper and lower parts of
Trim Frmae with the door open.
Fix it by color screw
With template 2, make 2 holes each at the upper
right and left parts of cabinet. (Others for the extra)
Fix "Bracket Top" according to the holes.
Trim Frame Dimensions
(Depth of trim Frame is 7/8")
f 7//_ f'
26 _"
27" Trim Frame
27_ ,,
29 34"
30" Trim Frame
i/_ ,,
3 4