Filter
Top Products
11
Beverage Storage Tank
The beverage storage tank holds 3 liters of beverage and is
located inside the refrigerator on the door.
To fill the beverage storage tank:
1. Make sure the beverage storage tank is seated firmly in the
refrigerator door.
2. Unscrew the cap on the storage tank cover, but do not remove
the cap from the strap attaching it to the cover.
3. Using a pitcher or carafe, fill the beverage storage tank with
up to 3 liters of water or a clear liquid beverage.
Dispense Water
4. Press a sturdy container against the dispenser lever.
IMPORTANT: You do not need to apply a lot of pressure to the
lever in order to activate the dispenser.
5. Once you have dispensed the desired amount of beverage,
release the lever, but continue to hold the container under the
spigot until the beverage stops flowing completely.
IMPORTANT: Hold the container with your hand while
dispensing a beverage. Do not place a container in the
dispenser cavity to fill.
6. Remove the container to stop dispensing.
Dispenser Lock
The dispenser can be locked for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The dispenser lock keeps the dispenser lever from
moving.
To lock and unlock dispenser:
■ Push down on the lock located on the back of the dispenser
lever until it is firmly against the back wall of the dispenser
cavity.
■ Lift up on the lock to unlock the dispenser lever.
Clean the Beverage Storage Tank
Clean the beverage storage tank, the storage tank cover and
valve parts that come into contact with the beverage before first
use and before each refill.
1. Remove the storage tank from the door by grasping the edges
with both hands and lifting it up and out.
2. Place the storage tank on a flat, firm surface and lift the cover
off.
3. Remove the valve by turning it counterclockwise.
4. Remove the cap from the tank cover by aligning the grooves
in the strap with the grooves in the tank cover and pulling
gently.
5. Using mild dish soap, warm water and a soft cloth, wash all
parts and the storage tank. Rinse thoroughly to make sure
there is no soapy residue and dry with a soft cloth.
NOTE: To avoid damage to the finish, do not use a rough or
abrasive cloth to clean the beverage storage tank.
A.Strap
B.Cap
A.Dispenser lever lock
B
A
A