Filter
Top Products
Supplemental Installation Information for APC Chillers 3
Typical Piping — Single Chiller
CRACs
CHILLER
Note
Components inside dashed lines are included with the chiller and CRACs. All other items
(valves, piping, etc.) are customer-supplied.
Pressure reducing/fill valve
Electric heater
Air separator and vent*
Air vent connection port
Flex connections
Pressure gauges/petcocks
Isolation valves
Heat exchanger
Strainer/blow-down valve
Flow switch
Expansion tank
Balance valve/drain plug
Dual pump
Storage tank — optional**
* Install at the highest point in the system.
**To provide the coldest possible water to the load, install the optional storage
tank on the leaving side of the chiller