Filter
Top Products
OFFSET TILT BOWL MIXER
MECHANICAL SPECIFICATIONS
Frame Assembly
• The exterior of the mixer is entirely covered with polished stainless steel and
mounted on a rigid steel frame treated with a stainless steel epoxy paint
• Rigid stainless steel bumper guards
• Lift lugs
• Anti-vibration pads
Bowl and Cooling Jacket
• The bowl is tilted to 140 degrees towards the front
• Stainless steel bowl and jacket totally redesigned for high efficiency (Glycol cooling)
• Bowl insulated with urethane foam covered with a welded stainless steel sheet
• Bowl rests on Nylatron bushings
• Bowl tested at 150 PSI
• Glycol manual hand valves are included
• Refrigeration hoses are included
Agitator and Drive Assembly
• Solid stainless steel Y type spiders split at main shaft and agitator bars
• Stainless steel primary and secondary agitator bars mounted on lubrication free
UHMW bushings
• Main shaft seals are easily removable and fabricated of polyethylene for exceptional
durability. This new type of seal allows easy cleaning.
• Solid stainless steel breaker bar (adjustable four positions)
• Heavy duty stainless steel main shaft
• Single end belt drive with integral gearhead motor mounted on adjustable base
eliminates binder
• Main motor can be replaced from the back or the drive side (depending on option)
• Standard agitator RPM: 35/70 (Other RPM's are available as options)
• Manual central lubrication system
Top Assembly
• 12" (30 cm) O.D. butterfly or sliding flour gate
• Two stainless steel liquid inlets
• Canopy scraper
• Flour vent
Tilting Assemblies
• Hydraulic tilt on 800lb. to 1300lb. models include:
- Hydraulic unit with manual back-up pump
- Hydraulic cylinder
• Mechanical tilt on 1600lb. to 3200lb. models include:
- Integral gearhead brake motor with chain and sprockets
- Caliper and disk bowl lock mechanism
- Air driven hydraulic pump for calipers
Mechanical Tilt Mechanism Side
Agitator Drive Side
Hydraulic Tilt Mechanism Side
With Special Operator Controls
Sanitary Main Shaft Seal
Mixer Top Canopy With Multiple
Flour Inlets and Sponge Door